|
|
| SideWinder |
|
Quick Install Guide.jpg) 1) Removing the SIDE plate Firstly place your Xtreamer on a flat surface |
Turn your xtreamer to a silent device The Sidewinder kit is comprised of 2 alluminum heatsinks that were specificaly designed to make your xtreamer totaly silent yet cool
and stylish. Both sides can be fitted. The fitting of the Xtreamer SideWinder will remove the need for the use of the fan in the Xtreamer.
The process of upgrading the cooler is simple, but we do recommend that this quick install guide is completely read before starting. Once completed, you should turn OFF the fan in the Fan Speed menu of the Xtreamer setup screen. To complete the upgrade, you will require all components in this kit and a small flat bladed screwdriver, or kitchen knife (take care, always point any sharp objects away from you when in use). |
 2)Take a small flat bladed screwdriver or other sharp instrument, and carefully insert it between the shiny black metal edge and the thin plastic wall. Once you have created a small gap, then carefully use the instrument to edge around the rest of the metal plate. |
 3)Take off the side metal plate |
 4)Removing the SIDE plate Remove all surplus sticky tape left on the on the flat plastic surfaces. |
  5)Remove the inner (silver) heat sink completely. IMPORTANT - DO NOT insert the instrument in further than 10- 15mm or the instrument may touch the electronics. |
 6)Removed the protective film from back of the SideWinder heat sink. |
 7)The CPU side plate is the plate which there is no connector information details |
 8)To prepare for the fitting of the Xtreamer SideWinder heat sink, please paste the thermal tape (included with this kit). |
  9)Fit the Xtreamer SideWinder heat sink to the Xtreamer. Install the same another Xtreamer SideWinder heat sink except pasted thermal tape part |
When the Xtreamer is turned on, you should notice that the Xtreamer SideWinder heat sink becomes slightly warm, this means it is working correctly. If after a few hours of use, the heat sink is not warm, the new cooler has not been fitted correctly - unplug the Xtreamer and check that the heat sink is in line with the plastic on all four sides. |
|
 | |||
|